Some buildup needs more than a standard cleaner. Try Mineral Remover to remove hard water spots, rust, baked-on grease, and stubborn brake dust in seconds.

How It Works

This acid-based formula dissolves buildup on contact, lifting it off the surface so you don’t have to scrub it out.

What You Get

• Dissolves hard water spots and mineral deposits on contact
• Works without abrasive scrubbing that risks the finish underneath
• Strong enough for stubborn, set-in spots

Results – 1:04

How To Apply An Acid-Based Cleaner

**Do not apply to raw metal.**

1. Rinse the surface first to clear loose dirt and debris
2. Apply Mineral Remover directly to affected areas
3. Let it dwell briefly (1-2 minutes), agitating with a detailing brush or Microfiber Applicator if needed. Wipe away Mineral Remover, then spray the surface with a mild alkaline cleaner like Spray Wash to help neutralize the acid.
4. Rinse thoroughly. Exterior use only.

FAQ

Will it damage my paint or clear coat?
**Do not use on raw metal.** When used as directed, Mineral Remover is formulated to break down tough grime and deposits without stripping the finish underneath. Avoid letting it sit and dry directly on the surface.

Can I use it inside the vehicle?
No. Mineral Remover is built for exterior use only. For interior grime, use Scrub.